Hi,
In our system scheduled SMB backup starting to fail.
It shows an error like this;
BR0278E Command output of '/usr/local/bin/bcv/SAP-SPLIT.sh /oracle/PRD/sapbackup/.bepvhlli.lst':
NWSegMgr:
Invalid or uninitialized partition found on drive sdx.
You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.
If you choose NO, you should exit evms and correct the problem on the drive.
Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr:
Invalid or uninitialized partition found on drive sdw.
But, from the same system we are getting a daily online backup. (using brtools). It is executing successfully
In ths case , What would be the reason to fail the Split-mirror backup?
Is it some issue with the scripts or some issue with the storage
Configuration is as follows;
Backup tool - HP Data Protector & brtools
DB-Oracle 10.2.0.4 , O/S - SuSE
Error log files are attached with this....& looking forward for your guidance
Note - Before the day where SMB backup fails , we have changed a power unit of the EVA server! Will it make an effect to this failure.
regards,
Zerandib
Log---------------------
BR0280I BRBACKUP time stamp: 2015-02-11 05.00.08
BR0315I 'Alter database begin backup' successful
BR0280I BRBACKUP time stamp: 2015-02-11 05.00.09
BR0295I Splitting mirror disks...
BR0280I BRBACKUP time stamp: 2015-02-11 05.06.50
BR0278I Command output of '/usr/local/bin/bcv/SAP-SPLIT.sh /oracle/PRD/sapbackup/.bepvhlli.lst':
#INFO
#INFO
#INFO SSSU for HP StorageWorks Command View EVA
#INFO Version: 8.0.0
#INFO Build: 111307A
#INFO NoSystemSelected> file /usr/local/bin/bcv/Fracture-and-Present.txt
#INFO
#INFO deleting file::/logs/cvclienttrace-150206-1.log, file age::4, maxAge::3
#INFO NoSystemSelected> SELECT CELL "SAPERP_EVA4400"
#INFO
#INFO SAPERP_EVA4400> SET OPTIONS ON_ERROR=EXIT_ON_ERROR
#INFO
#INFO SAPERP_EVA4400> LS VDISK
#INFO
#INFO Vdisks available on this Cell:
#INFO \Virtual Disks\BIN\DBLOCK\ACTIVE
#INFO \Virtual Disks\BIN\SAPORA\ACTIVE
#INFO \Virtual Disks\CI\ASCI01\ACTIVE
#INFO \Virtual Disks\CI\CILOCK\ACTIVE
#INFO \Virtual Disks\CS\ASCS00\ACTIVE
#INFO \Virtual Disks\CS\CSLOCK\ACTIVE
#INFO \Virtual Disks\CS\SAPMNT\ACTIVE
#INFO \Virtual Disks\DB\ARCH\ACTIVE
#INFO \Virtual Disks\DB\ARCH\archbcv
#INFO \Virtual Disks\DB\DATA\ACTIVE
#INFO \Virtual Disks\DB\DATA\databcv
#INFO \Virtual Disks\DB\REDO\ACTIVE
#INFO \Virtual Disks\DB\REDO\redobcv
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\DATA\databcv" WRITECACHE=writethrough
#INFO
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\ARCH\archbcv" WRITECACHE=writethrough
#INFO
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\REDO\redobcv" WRITECACHE=writethrough
#INFO
#INFO SAPERP_EVA4400> PAUSE 120
#INFO
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\DATA\databcv" FRACTURE
#INFO
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\ARCH\archbcv" FRACTURE
#INFO
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\REDO\redobcv" FRACTURE
#INFO
#INFO SAPERP_EVA4400> pause 60
#INFO
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\DATA\databcv" WRITECACHE=writeback
#INFO
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\ARCH\archbcv" WRITECACHE=writeback
#INFO
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\REDO\redobcv" WRITECACHE=writeback
#INFO
#INFO SAPERP_EVA4400> ADD LUN 5 VDISK="\Virtual Disks\DB\DATA\databcv" HOST=erpbk101
#INFO
#INFO SAPERP_EVA4400> ADD LUN 6 VDISK="\Virtual Disks\DB\ARCH\archbcv" HOST=erpbk101
#INFO
#INFO SAPERP_EVA4400> ADD LUN 7 VDISK="\Virtual Disks\DB\REDO\redobcv" HOST=erpbk101
#INFO
#INFO SAPERP_EVA4400> LS VDISK
#INFO
#INFO Vdisks available on this Cell:
#INFO \Virtual Disks\BIN\DBLOCK\ACTIVE
#INFO \Virtual Disks\BIN\SAPORA\ACTIVE
#INFO \Virtual Disks\CI\ASCI01\ACTIVE
#INFO \Virtual Disks\CI\CILOCK\ACTIVE
#INFO \Virtual Disks\CS\ASCS00\ACTIVE
#INFO \Virtual Disks\CS\CSLOCK\ACTIVE
#INFO \Virtual Disks\CS\SAPMNT\ACTIVE
#INFO \Virtual Disks\DB\ARCH\ACTIVE
#INFO \Virtual Disks\DB\ARCH\archbcv
#INFO \Virtual Disks\DB\DATA\ACTIVE
#INFO \Virtual Disks\DB\DATA\databcv
#INFO \Virtual Disks\DB\REDO\ACTIVE
#INFO \Virtual Disks\DB\REDO\redobcv
#INFO SAPERP_EVA4400> EXIT
#INFO Rescanning /sys/class/scsi_host/host0
#INFO Rescanning /sys/class/scsi_host/host1
#INFO Rescanning /sys/class/scsi_host/host2
#INFO Rescanning /sys/class/scsi_host/host3
BR0280I BRBACKUP time stamp: 2015-02-11 05.06.51
BR0278E Command output of '/usr/local/bin/bcv/SAP-SPLIT.sh /oracle/PRD/sapbackup/.bepvhlli.lst':
NWSegMgr:
Invalid or uninitialized partition found on drive sdx.
You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.
If you choose NO, you should exit evms and correct the problem on the drive.
Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr:
Invalid or uninitialized partition found on drive sdw.
You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.
If you choose NO, you should exit evms and correct the problem on the drive.
Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr:
Invalid or uninitialized partition found on drive sdv.
You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.
If you choose NO, you should exit evms and correct the problem on the drive.
Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr:
Invalid or uninitialized partition found on drive sdu.
You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.
If you choose NO, you should exit evms and correct the problem on the drive.
Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr:
Invalid or uninitialized partition found on drive sdt.
You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.
If you choose NO, you should exit evms and correct the problem on the drive.
Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr:
Invalid or uninitialized partition found on drive sds.
You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.
If you choose NO, you should exit evms and correct the problem on the drive.
Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr:
Invalid or uninitialized partition found on drive sdr.
You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.
If you choose NO, you should exit evms and correct the problem on the drive.
Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
BR0280I BRBACKUP time stamp: 2015-02-11 05.06.59
BR0279E Return code from '/usr/local/bin/bcv/SAP-SPLIT.sh /oracle/PRD/sapbackup/.bepvhlli.lst': 0
BR0299E Split/resynchronization of mirror disks failed
BR0280I BRBACKUP time stamp: 2015-02-11 05.06.59
BR0317I 'Alter database end backup' successful
BR0056I End of database backup: bepvhlli.anf 2015-02-11 05.06.59
BR0280I BRBACKUP time stamp: 2015-02-11 05.06.59
BR0054I BRBACKUP terminated with errors